Support Center

Shoulder sensor placement

Last Updated: Aug 09, 2017 04:28AM UTC
1. Ask the employee to place their arms by their side and bend their elbows at a 90° angle.
 
​2. Mark the midway point on both arms. Peel sensor adhesives off roll and apply to the back of the myViSafe sensors, then take off the tape to place the sensor onto the body.
 
​3. Peel sensor adhesives off roll and apply to the back of the myViSafe sensors, then take off the tape to place the sensor onto the body.
 
​4. Place the sensors at the midway line. Ensure that the green sensor is on the employee’s left arm, and the blue sensor is on the employee’s right arm. Both sensor lights must be at the top when placed onto the employee.