Support Center

Starting A Run Live Assessment

Last Updated: Jul 10, 2018 06:49AM UTC
1. From the client list screen, select the client you would like to test and select “New Test”. Following the onscreen prompts select “Run”.
 
​2. Push the button on the side of the dorsaVi Professional Suite sensors to turn them on. From the sensor selection screen, tap on the sensors with the corresponding serial numbers.
 
​3. Peel the Sensor Adhesives off the adhesive roll and apply to the back of the dorsaVi Professional Suite sensors.
 
​4. Using the dorsaVi Professional Suite Tibia template place the zero line of the ruler on the inferior border of the medial malleolus and mark the shin bone at the appropriate height demarcation.
 
​5. Place the dorsaVi Professional Suite sensor on the tibia in portrait orientation so it sits in the middle of the line drawn in step 4 with the sensor light located in the top corner.
 
​6. Repeat steps 4 and 5 for the opposite leg. Ensure that both sensors are placed at equal heights on the shin.
 
​7. Following the on-screen prompts, ensure the sensors have been placed correctly. If the sensor placement is correct select “Yes” in the dorsaVi Professional Suite app. If the sensor placement is incorrect select “No, swap colors”.
 
8. Create your assessment protocol by using labels or tags for your test from the default list. You may create multiple tests with the same label or add your own customized labels by selecting 'Add New Test'. When you have finished creating your test protocol, select 'Start' to begin testing.