Support Center

Low Back Quick Assessment Screen Overview

Last Updated: Jul 09, 2018 06:22AM UTC

Standing lumbar test

  
1 End the current assessment without saving the session data.
2 View the Overview screen.
3 End the current assessment, save the session data and generate a report for the assessment.
4 Test name and instructions.
5 Recalibrate the sensors if the avatar’s posture does not look correct.
6 Start capturing data for the test.
7 Move on to the next test.
8 When data is being captured, the Movement Egg will appear and provide a real-time visualization of the client's movements through out the test.
9 This section compares the client's results to normative data.
10  Redo the selected test.
11 Stop capturing data for the test and move onto the next test.
 

Standing Pelvic Tilt test

  
1 End the current assessment without saving the session data.
2 View the Overview screen.
3 End the current assessment, save the session data and generate a report for the assessment.
4 Test name and instructions.
5 Recalibrate the sensors if the avatar’s posture does not look correct.
6 Start capturing data for the test.
7 Move on to the next test.
8 When data is being captured, the pelvic tilt slider will appear and provide a real-time visualization of the client's pelvic tilt movements through out the test.
9 This section compares the client's results to normative data.
10  Redo the selected test.
11 Stop capturing data for the test and move onto the next test.
 

Sitting Pelvic Tilt test

  
1 End the current assessment without saving the session data.
2 View the Overview screen.
3 End the current assessment, save the session data and generate a report for the assessment.
4 Test name and instructions.
5 Recalibrate the sensors if the avatar’s posture does not look correct.
6 Start capturing data for the test.
7 Move on to the next test.
8 When data is being captured, the Movement Egg will appear and provide a real-time visualization of the client's movements through out the test.
9 This section compares the client's results to normative data.
10  Redo the selected test.
11 Stop capturing data for the test and move onto the next test.
 

Sitting Postures test

  
1 End the current assessment without saving the session data.
2 View the Overview screen.
3 End the current assessment, save the session data and generate a report for the assessment.
4 Test name and instructions.
5 Recalibrate the sensors if the avatar’s posture does not look correct.
6 Start capturing data for the test.
7 Move on to the next test.
8 Choose a sitting posture to capture by pressing the “Take Snapshot” button. Completed tests will display the trunk, lumbar and pelvis angles, and will appear on the pelvic tilt slider as a green circle, square and triangle. Select the circle arrow to repeat the test.
9 When data is being captured, the pelvic tilt slider appears to provide a real-time visualization of the client's posture for each movement.
10  Stop capturing data for the test and move onto the next test.
 

Overview Screen

  
1 End the current assessment without saving the session data.
2 Select a test to enter the Capture screen. Tests with “Captured” above the test icon have data recorded against them, whereas tests with “Ready” above the test icon do not have data captured against them.
3 End the current assessment, save the session data and generate a report for the assessment.
4 View the Capture screen.