Support Center

System Description

  • Charging light colour guide

    The charging light allows you to see how much charge your sensors have left while the sensor is turned on. ...

    May 28, 2018 11:27AM UTC
  • Wireless sensor overview

    1 Sensor status light. 2 Charging light. 3 Charging port. 4 On button. 5 Sensor serial number.

    May 28, 2018 11:30AM UTC
  • Sensor status light colour guide

    The sensor status light is used to identify whether your sensors are paired with your ViMove2 software. Lig...

    May 28, 2018 11:24AM UTC
  • Sensor Overwraps

    The Sensor Overwraps are used to hold the ViMove2 sensors in place for longer periods of time during a Low Bac...

    May 14, 2018 10:23AM UTC
  • Sensor Adhesives

    The Sensor Adhesives are used to attach ViMove2 sensors to the patient’s skin. To attach the Adhesives, peel t...

    May 14, 2018 10:26AM UTC
  • Charging your ViMove2 sensors

    Using the MicroUSB cable provided, plug the MicroUSB ends into the sensors and the USB end into the power plug...

    May 14, 2018 10:37AM UTC
  • Turning your ViMove2 sensors on

    To turn your sensors on, press the On button located at the front of the sensor. ViMove2 sensors cannot be t...

    May 14, 2018 10:31AM UTC